In cases where the PS4 cannot recognize an HDD that has been inserted, the error number CE-34335-8 is generated. In this case, the storage device is malfunctioning, or the PS4 itself is malfunctioning. One of the most aggravating Playstation 4 errors is the PS4 Error CE-34335-8. Until now, Sony has not issued any official statement.
The PS4 owner is set to start playing a game, but an error message reads, “Cannot start the PS4” when the system comes on. Access to the system storage is denied. The message “(CE-34335-8)” displays on the screen when you press the power button for one second (until the system beeps).
Recognizing PS4 Error CE-34335-8
The PS4 system cannot connect to the hard disc, resulting in Error [CE-34335-8]. It indicates that either the PS4 hard disc has been damaged and must be repaired, or a severe problem with the PS4 hardware needs to take the console to a repair center for evaluation.
Causes of PS4 Error CE-34335-8
A malfunction with the PS4’s Hard Disk Drive is the cause of the CE-34335-8 error. However, this error might occasionally be caused by other problems.
The following are some possible causes of the error code CE-34335-8:
- Because of a corrupted Hard Disk Drive.
- The HDD may have been damaged.
- The HDD may not be receiving power because the power supply wire has been damaged.
- Because the PS4 shut down so unexpectedly, the HDD (Hard Disk Drive) might be malfunctioning.
How To Fix PS4 Error CE-34335-8?
In Safe Mode, Try To Fix CE-34335-8
There may be a problem with your PS4’s internal hard drive if you obtain this error number and the message “Cannot access system storage.” To fix the problem, follow the procedures outlined below.
- Use a USB cable to connect your PS4 controller to the console.
- Press and hold the PS4 console’s power button until the second beep is heard.
- Select ” Initialize PS4 (Reinstall System Software).”
Fix Bad Sectors by Using the “Chkdsk” Command
Take off the hard drive from your PS4 and plug it into a Windows computer.
In Windows, pick the “Run as Administrator” option and then type “Command Prompt” into the search field in the Taskbar search bar.
To run the command, type it in the Command Line Terminal and press Enter:
Chkdsk G: /r /f
Drive G: has been provided as an example in this circumstance. You can also change the PS4 hard disk’s drive letter to match your system’s drive allocation.
The CHKDSK command may take a while to finish correctly.
Read Also: How to Fix HDMI Port PS4
Connect a PS4 HDD to a PC To Fix PS4 Error CE-34335-8
Try connecting the HDD to your PC if the PS4 does not recognize it, and see if you can determine the HDD’s state. If the PC recognizes the HDD, the situation is delicate.
To fix the issue, use HDD repair software on a PC connected to the HDD. Because the PC diagnostic and repair tool may be quickly downloaded and installed, you can fix the HDD with those repair and diagnostic tools. The HDD can be connected to a PC in two ways: internally or externally. I’ll show you how to accomplish it in both ways?
Internal Connection
Connecting the PS4 HDD internally won’t be easy if you use a laptop. Desktop PCs are the best fit for this strategy. Connect the PS4 HDD to a free SATA port on your PC’s motherboard. SATA data cable is required for this task.
The first thing you should do is shut down your computer. After that, locate the SATA data and power lines. When you look at how your PC’s hard disc is attached to the motherboard, you’ll quickly spot them. Just think of your PS4’s hard drive in this way.
SATA cables are typically used to connect a hard disc. The red SATA data wire connects to the SATA power cable on the right.
Your desktop PC will identify your PS4’s hard disc once it’s attached to it internally.
External Connection
Laptops and desktops can use this method; however, an external hard drive enclosure is required. To get that, you can either buy a new external hard drive or dismantle your current one and use its enclosure for this purpose.
Once the PS4 hard drive is within the enclosure, ensure that the two USB ports on the external USB bridge are firmly inserted into the PS4 hard drive’s ports.
Wait for your PC’s freshly constructed external hard drive to be detected before connecting it to one of the available USB ports. If that’s not the case, all you have to do is restart your computer to see.
Read Also: How To Fix PS4 Error Code CE-34878-0?
What to Do if the PC or Laptop Doesn’t Detect HDD?
A PC or laptop can’t detect a broken or corrupted PS4 Hard Disk Drive (HDD), indicating that the PS4’s HDD is defective. There’s just one thing to do in this situation: get a new hard drive.
- Follow these steps to get started: > Disk management is a subset of the larger category of “administrative tools.” Windows and see if it’s recognized or not.
After completing the preceding steps, if you see the PS4 HDD, there may be a way to fix it. To see if the HDD is working correctly, you can now copy and paste some files into it. Once the item has been successfully copied to the HDD, you can remove it and re-insert it into your PS4.
If the item isn’t duplicated, you’ll have to reassign the HDD to a new disc, format it, and try again. When the drive has been successfully formatted, you can immediately begin using it.
What to do if the PC or Laptop identifies the HDD?
There may be a software problem on the HDD if the PC or laptop identifies or detects the HDD. HDD repair and diagnostic tools might help you fix the problem. The drive has a faulty sector that needs to be overridden. Using the Chkdsk tool on Windows OS, you may quickly resolve this issue.
Now Try The Hard Drive Again
You must insert the PS4 hard disc into the console after being repaired on the PC. That alarming error notice, which indicates that the PS4 won’t boot and that you can’t access system storage, isn’t intended to pop up again.
Now is the time to perform a complete backup of your PS4 HDD. Go to System -> Backup and Restore -> Back up and restore. Make a Copy of Your PS4 Data
Read laso: How To Fix NP-34957-8 PS4 Error
What If The Error Persists?
PS4 Error CE-34335-8 can be fixed by either replacing the PS4’s internal hard drive with an SSD or purchasing a new power supply. What is the reason for this? The following is what I can tell you…
After repairing the internal hard drive, this problem persists, indicating that the PS4’s hardware has a power issue and the hard drive isn’t receiving enough power, preventing it from operating as it should.
In this case, upgrading the PS4’s hard drive to an SSD may be the answer because they use less power than mechanical hard drives. You may take your console to a repair shop to have it wholly diagnosed or handle it yourself if you’re tech-savvy enough. Otherwise, the situation is challenging.
FAQs – PS4 Error CE-34335-8
How do I fix error CE-34335-8?
1) Remove the top cover from the PS4TM console, turn it off, and unhook the power cord.
2) Ensure that the HDD is correctly installed before proceeding further with the installation.
3) It is possible that the HDD is corrupted or defective or that your console needs repair. Call or email us for additional information.
What does Error Code CE-43461-8 mean on PS4?
While trying to install new console firmware, some users get an error code of CE-43461-8. At the end of the updating process, this error is frequently linked to a problem with the internal hard drive.
How do you know when your PS4 is dying?
The PS4’s LED indicator light on the console’s side should flash blue for a few seconds before turning white. There may be a brief blue light pulse before the console power down for no apparent reason when it’s suffering from the “Blue Line of Death.”
Conclusion
When the PS4 won’t boot up, here are a few things you can try to get it to work again: The PS4 Error CE-34335-8 can be fixed using any of these methods. If the hard disc with your PS4 is damaged or corrupt, you can purchase a new one. Then again, it would help if you backed up everything you care about, from screenshots to movies to settings.
Reference: https://www.playstation.com/en-us/support/error-codes/ps4/ce-34335-8/
