When you play PS4 games, communicating online with others in a party chat may be an issue. And when you test the Internet connection, you’ll notice the PS4 NAT type failed. Don’t worry! Failed problem with PS4 NAT Type remedies.
This article introduces different solutions to How to Fix No Voice Due to NAT Issues PS4. Try the procedures below. You don’t have to try all of them; work through them until you have addressed your problem.
What is the PS4 NAT type?
NAT stands for Network Address Translation, which means you can transfer a public IP address to a private IP and vice versa. In PS4 games, connecting with other PS4 systems is easy or difficult, especially when using communication features like the party chat.
There are three NAT kinds in your PS4:
Type 1 (open): The device is connected directly to the Internet (no router and no firewall), and the other PS4 systems should not be complicated.
Type 2 (Moderate): The device is connected adequately via a router, and you won’t have troubles in general.
Type 3 (Strict): The device is connected via a router without open ports or DMZ configuration, and you experience connectivity troubles or voice chat problems.
The NAT type usually fails due to network problems such as incorrect network settings or network firewall problems. Changing the NAT type might be an efficient way to improve the state of your PS4 network.
You currently cannot directly monitor the condition of the NAT type with your PS4 settings, and you have to change the NAT type using the router settings.
How to Fix No Voice Due to NAT Issues PS4
It is essential to reset your PS4 before taking any of the recommended troubleshooting procedures listed below. It refreshes the operating system and removes any incorrect temporary data that may cause the problem.
Various things can create this difficulty, from an incorrect configuration to a router failure. The troubleshooting actions below are required to fix the problem.
Read Also: How to Appear Offline Ps4 & Xbox
In essence, NAT or Network Address Translation converts a private IP address to a public IP address and vice versa.
The PS4 device requires this to communicate with other PS4 devices. NAT works typically on a router. It links two networks and then transposes private addresses into legal addresses in the internal network before packets are sent to another network.
You frequently receive a “failed PS4 NAT type” error message if there are wrong network settings.
Method #1) How to Fix Nat Type on Ps4 Manually
In this scenario, you first have to try to configure the settings manually. First, check the PS4 IP address.
- Navigate to your PS4’s main screen and open your Settings. Once in Settings, click on the Network subcategory.
- Click the “View Connection Status” option.
- The IP address for the PS4 console is listed.
If the IP address causes the issue, you need a different computer to fix it, preferably a laptop.
- Press Windows + R, type “cmd,” press enter on the PC (linked to the same PS4 network).
- Execute the following command once prompt: ipconfig/all
- Take note of IP address, default gateway, DNS server subnet mask.
- Go to PS4 Settings > Network > Connection to the Internet.
- If you connect to WiFi, select Use WiFi or LAN cable if you connect to Ethernet.
- Select Custom, and then enter your recently noted network information.
- Choose Do Not Use Proxy Server.
- Wait for updating. Could you wait for it? Select Internet Connection Test when you see updated Internet settings.
- You’ll see and know the NAT type of your PS4 internet connection.
Check if the failed PS4 NAT type problem still occurs.
Read Also: How to Update Disney Plus on PS4? Easy Guide
Method #2) Activate Universal Pnp on the Router
UPnP, meaning Universal Plug n Play, lets your device discover the router for connecting to the Internet. Enabling UPnP helps improve connectivity when a game is played, or a friend chats with.
- Log into your router. To log in, you must input the IP address for the router, which is also written on the rear or in the box. The IP should appear like ‘192.168.1.1’ or ‘192.168.8.1’ and so forth. Please enter the details needed and get access to them.
- Go to the UPnP menu and activate the service. Each router has its own settings layout, so you have to seek them or refer to the manual for location.
- Save both devices modifications and power cycle. Check your Internet connection on your PS4 after it is reactivated and see if the correct type of NAT is now selected.
Check whether the failed PS4 NAT type problem still occurs.
Method #3) Activate the DMZ Server
You can also enable the DMZ (Demilitarized Zone) server to solve a problem. DMZ is a logical or physical subset that exposes the external services to an untrusted network. The Internet is this untrusted network.
- Go to your PS4 network settings and enter the IP address.
- Log into your router. To log in, you must input the IP address for the router, which is also written on the rear or in the box. The IP should appear like ‘192.168.1.1’ or ‘192.168.8.1’ and so forth. Please enter the details needed and get access to them.
- Open your router’s DMZ menu. You can include this option either in the NAT subcategory or in transmission.
- Enter here the PS4 IP address and make modifications.
- Save all your modifications and quit.
- Restart the router and PS4.
Read Also: How to Enable Disc Playback Feature on Ps4 Without Internet?
Check whether the failed PS4 NAT type problem still occurs.
Method #4) Advance Ports to Your Network
One final problem-solving step is port forwarding. Port forwarding. It means that a communication request is redirected from one address and port number to another while packets go on a network gateway, such as a router.
- Log into your router. To log in, you must input the IP address for the router, which is also written on the rear or in the box. The IP should appear like ‘192.168.1.1’ or ‘192.168.8.1’ and so forth. Please enter the details needed and get access to them.
- Navigate to Port Transfer Before adding the ports to the forwarder table, and this will be recommended for you to ensure that your PS4 has a name and IP address assigned to each of these ports.
- Add port forwarding table ports on your router: 80(TCP), 443(TCP), 3478(TCP and UDP), 3479(TCP and UDP), 3480. (TCP).
- Save settings. Save settings.
- Restart router. Restart router.
Check whether the failed PS4 NAT type problem still occurs.
FAQs – How to Fix No Voice Due to NAT Issues PS4
How do I fix a NAT failure on my PS4?
#1) Reconfigure your PlayStation 4 network settings.
#2) Get PS4 network information.
#3) Switch to the DMZ server.
#4) IPV6 disabled.
#5) Activate Universal Plug and Router Play.
#6) Change your DNS server console to Google DNS.
How to solve NAT problems?
The most straightforward approach to avoiding NAT limits on your ISP is using a VPN with a quick connection, such as Speedify. The ISP can’t observe your traffic with a VPN and can’t set ports restrictions. All VPN traffic passes over default open ports.
Why does my PS4 say NAT type failed?
The “NAT type failed” issue may be caused by the improper network setup of your PS4; thus, you can check if the IP address of your PS4 has been altered. You can also set up the necessary network settings on your PS4 manually.
Read More:
